3010i Compact Bookshelf Speaker Pair + QED Silver Anniversary XT Speaker Cables
- Speakers and cables designed and tested together
- 3010i speakers utilize P2P™ bracing to deliver room-filling sound
- 4-inch precision drivers
- Cable has everything the Silver Anniversary has plus X-Tube™ technology
What's In The Box
- 2 x 3010i Bookshelf Speakers
- 2 x Foam Bungs
- 2 x Speaker Grilles
- 1 x User Manual
- 1 x Pair Handling Gloves
- 2 x 6.5ft (2M) Terminated Speaker Cables with Heatshrink QED Airloc 4mm Banana Plugs
Experience the 3010i
Customers Also Viewed
|Dimensions||(H/D/W) 10" x 9.9" x 5.9"|
|Enclosure Type||2-Way Reflex|
|Frequency Response||(+/-3dB) 65Hz-30kHz|
|Minimum Impedance||4 Ohm|
|Sensitivity||86dB (2.83V @ 1m)|
|Weight||4.1kg / 9lbs.|
Brochures & Manuals
Experience the 3010i (Continued...)
Open soundstage from slim-line speaker
The focus of any great loudspeaker is to produce an open, ‘being there’ sound and the Q 3010i do just that despite their compact size. Boasting room-filling sound with its 100mm (4 in) and 22mm (0.9 in) precision drivers, focussing on power-to-size ratio, the crossover has been revised to take advantage of a larger cabinet volume to enhance sensitivity and bass extension. The Q 3010i speakers can be shelf-mounted on compliant, pre-fitted rubber feet, stand-mounted or wall-mounted on optional, dedicated stands and brackets.
Increased cabinet size delivering a bolder sound
The 3010i maintain the same acoustically optimal front profile, but have been made slightly taller and 25% deeper than previous models. This increased internal volume has enabled Q Acoustics to gain an extended low frequency response from the ported design so that more-than-ever the smaller enclosures in the range belie their diminutive stature with an impressively large-scale sound. As an added benefit the enlarged front-to-back dimension means that any cone- generated noise reflected from the back wall of the enclosure and out through the cone itself is reduced.
New Low Profile Binding Posts
Conventional terminal panel cut-outs have been removed, giving greatly improved structural integrity to the enclosures and new low profile binding posts have been incorporated with sockets deep enough to accept 4mm (0.16 in) Banana Plugs. The speaker can be positioned very close to a rear wall even when banana plugs rather than spades or bare wires are used.
Beautiful Inside and Out
Not only does the entire 3000i range features all new enclosure aesthetics but it also offers 4 new contemporary finishes. The new 3000i series speakers are available in four standard finishes; Graphite Grey, English Walnut, Carbon Black or Arctic White. All are finished with an attractive chrome bezel around each driver and feature magnetic speaker grilles.
The multi-award winning Silver Anniversary XT cable delivers superior performance for all your hi-fi and home theatre needs
Silver Anniversary-XT has been specifically designed as the natural replacement for the multi-award winning Silver Anniversary speaker cable. Combining the features of Silver Anniversary with the added enhancement of X-Tube technology to combat the skin effect and deliver stunning detail.
- High performance low density polyethylene dielectric
- Cuts down on the amount of audio signal energy lost due to cable capacitance
At low frequencies both X-TubeTM and conventional stranded/solid core speaker cables convey signals in a linear way. However, at high frequencies, X-TubeTM retains a near-linear signal transfer, whereas the conventional cable fails to conduct uniformly across the entire conductor area. The result is that X-TubeTM delivers greater fidelity across the audio spectrum which would other wise be lost in ordinary cables. Silver plated 99.999% OFC conductors
Provides a low frequency path for the audio signal and delivers stunning high frequency detail.